ZH Series High Head Slurry Pump
Contact Us for Shipping, delivery, and payments information.
Products Category
Tag list
- 产品描述
-
High Head Slurry Pump Typical Application:
★Mill Discharge
★Coarse Sand
★Tailings
★ Mineral Concentration
★ Heavy Media
★Coal Washing
★Phosphoric Acid
★Process Chemical
★Bottom/Fly Ash
★Metal SmeltingHigh Head Slurry Pump Features
★ Our ZH Series high head centrifugal slurry pump has only one impeller that allows slurry to enter the chamber from the suction side. It is a centrifugal high head slurry pump designed to handle high pressure, high flow applications.
★The interior of the double-sleeve design is a wet end made of wear-resistant high chrome.
★ Different types of impellers are designed to handle different flow patterns.
★The shaft is sealed with a packing gland. Propeller dynamic sealing and other mechanical seal configurations are an option.
★The ZH Series high head centrifugal slurry pump is designed to deliver high volume, low lift high speed pumps. It is suitable for low-abrasive, low-viscosity slurry pumping applications.★ The discharge have 8 positions spaced at 45 degrees and can be selected to meet installation and application requirements.
High Head Slurry Pump Advantages
★ The double-sleeve design of our single-suction High Head Electric slurry pump allows for axial splitting. Made of ductile iron, the pump casing is able to withstand the main pressure generated in the pump chamber. The lining is made of wear-resistant material and does not stick to the outer casing for easy maintenance and replacement.
★ The High Head Electric slurry pump body is fixed to the mount by a plurality of bolts. The user can easily adjust the gap between the impeller and the suction pad from below the housing.
★ Packing gland seals, mechanical seals and drain seals prevent mud leakage during pumping.
★ The compact construction allows the pump to occupy a small footprint.Hydraulic Modeling
The wet end piece can be cast from hard metal. They maintain good hydraulic performance even when the pump is heavily worn. This helps the Filter Press Feed Slurry Pump achieve optimum pumping efficiency levels for extended periods of time. The large diameter impeller design, combined with the narrow flow path, ensures that the slurry can be pumped to a higher than normal height.
Shaft Seals
Packing Seal
As one of the most commonly used seals for rotating shafts, the gland seals can be placed in a low or full flush arrangement that uses flushing water to prevent media from escaping from the pump casing. This seal is suitable for almost all pumping applications. In the case of corrosive solids or high temperatures, polytetrafluoroethylene or aramid fibers are used as the sealing material. In order to further improve the wear resistance of the shaft, ceramic coated bushings will be used.
Centrifugal Seal-Expelle
The combination of impeller and ejector creates a seal that prevents leakage. This seal, together with the seal or lip seal used as a closure seal, can handle the sealing requirements of applications where full flush seals are not possible due to lack of water on site, or allow seal water to enter the pump chamber to dilute the slurry.
Mechanical Seal
The ZH series high head centrifugal slurry pump adopts leakproof mechanical seal design, which is convenient for installation and replacement. Other types of mechanical seals are the choice of centrifugal pumps suitable for a variety of pumping applications.
We also use special ceramics and alloys for friction on high strength and hardness parts. The unique design and seamless fit between the mechanical seal and the sealed cavity provide excellent wear and impact properties, ensuring its effectiveness under the toughest conditions.A high head slurry pump is designed to transport abrasive slurries over long distances or to higher elevations. Featuring wear-resistant components and reliable hydraulic performance, it supports mining, mineral processing, and industrial wastewater applications.
ZH clear water performance tableModel
Maximum motor power (KW)
Material - Liner
Material - Impeller
Clear water performance - Capacity Q (m鲁/h)
Clear water performance - Capacity Q (l/s)
Clear water performance - Head (m)
Clear water performance - Speed (r/min)
Clear water performance - Efficiency 畏%
Clear water performance - NPSH (m)
1.5/1C-ZH
30
M
M
16.2 - 34.2
4.5 - 9.5
25 - 92
1400 - 2200
20
2 - 5.5
3/2D-ZH
60
M
M
68.4 - 136.8
19 - 38
25 - 87
850 - 1400
47
3 - 7.5
4/3E-ZH
120
M
M
126 - 252
35 - 70
12 - 97
600 - 1400
50
2~5
6/4F-ZH
560
M
M
324 - 720
90 - 200
30 - 98
600 - 1000
64
3~8
8/6T-ZH
1200
M
M
576 - 1152
160 - 320
32 - 95
450 - 725
65
6~10
Among them
For high density, strong abrasive slurry, the flow range is 40~80%;
For medium density, medium abrasive slurry, the flow range is 40~100%;
For low density, low abrasive slurry, the flow range is 40~120%.
For details, please refer to the bottom clear water performance table.Outline drawing

Outline Dimensions
Model
A
B
C
D
U
E
F
G
H
J
K
L
M
N
S
T
V
Suction flange - O.D
Suction flange - I.D
Suction flange - HOLES
Suction flange - P.C.D
Discharge flange - O.D
Discharge flange - I.D
Discharge flange - HOLES
Discharge flange - P.C.D
The anchor hole
Weight (Kg)
1.5/1C-ZH
759
406
311
254
42
121
306
270
194
254
/
11
175
356
32
48
252
152
38
4 - ø17
114
152
25
4 - ø17
114
4 - ø19
318
3/2D-ZH
986
492
364
330
65
164
389
384
254
368
/
51
213
432
38
64
298
216
76
8 - ø19
178
203
51
4 - ø19
165
4 - ø22
750
4/3E-ZH
1240
622
448
457
80
222
492
492
330
432
2
/
257
546
54
76
381
254
102
8 - ø19
210
254
76
8 - ø19
210
4 - ø29
1250
6/4F-ZH
1556
857
635
610
100
279
584
616
413
546
26
/
349
762
95
98
470
337
152
8 - ø22
292
305
102
8 - ø22
260
4 - ø35
2531
8/6T-ZH
2275
1150
1040
650
150
350
852
835
584
813
/
160
880
900
80
125
538
432
203
8 - ø29
375
432
152
8 - ø29
375
4 - ø48
6586
6S-ZH
1700
920
780
450
120
280
622
625
415
615
/
155
640
760
70
90
382
380
152
8 - ø27
320
420
150
8 - ø27
360
4 - ø35
3450
ZH Series High Head Slurry Pump
Contact Us for Shipping, delivery, and payments information.
Products Category
Tag list
Product Accessories
Content update in progress,...