• ZJQ Submersible Slag Pump
ZJQ Submersible Slag Pump
+

ZJQ Submersible Slag Pump

ZJQ series pump is developed and improved from ZJL (vertical slurry pump) and overcome its deficiency.

WhatsApp:

Contact Us for Shipping, delivery, and payments information.

Products Category

Tag list

  • 产品描述
  • Overview

    ZJQ series pump is developed and improved from ZJL (vertical slurry pump) and overcome its deficiency. What's more, the pumps are comprehensively optimized and innovatively designed in the hydraulic model, sealing technology, mechanical structure, and protection control. This series has simple structure, easy installation, safe and reliable use, and long life. The pump does not need to construct a complex ground room and fixtures when it is submerged. That makes the site cleaner without noise and vibratio.

    Main Usage

    This series is suitable for conveying slurry with abrasive particles such as sand, cinder, tailings, etc. It is mainly used in metallurgy, mining, power, chemical industry, environmental protection, dredging, municipal engineering and other industries. It is easy to install and move. It also has high slag extraction efficiency and can safely run under bad working conditions. It is an ideal product to replace traditional vertical sump pump and submersible sewage pump.

    Working Condition

    1.Power supply: 380V, three-phase, 50HZ (customized voltage and frequency according to requirements).

    2.Medium temperature is generally not more than 60C°, PH value 4-10, medium gravity W 1300kg/ m3.

    3.Suitable for medium with strong abrasive solid particles and mildly corrosive sewage slurry.

    4.The diameter of solids in the medium shall not be greater than 80% of the minimum port size of the pump.

    Model Implication

    80

    ZJ

    Q

    A

    30

    Discharge diameter (mm)

    Series

    Submersible

    Subsection

    Impeller diameter

    Structure Drawing

     

     

    1. Approved cable cover  2. Electrode cap  3. Junction box  4. Cylindrical Roller Bearings  5. Stator rotor assembly  6. Shaft  7. Angular contact ball bearings  8. Motor barrel  9. Machine sealing  10. Cartridge seals  11. Release Collar  12. Shaft Sleeve  13. Impeller  14. Back liner plate  15. Casing  16. Front liner plate  17. Die holder  18. Base  19. Retainer plate  20. Stir wheel

    Structure Specification

    1.Casing and impeller

    Based on the test, the casing and impeller are carefully selected and matched. The casing and impeller are made of high-chromium material. It has good non-clogging performance, high efficiency, flat power curve, unlikely to overload, accurate impeller balance, small vibration and stable operation.

    2.Agitator

    The stirring wheel is at the bottom of the pump. It can stir the deposited sediment in the bottom of the water into a turbulent flow and pump it. It integrates diving, stirring, sand blowing, and sand pumping. It has high efficiency and more thorough dredging.

    3.Motor

    The submersible motor is specially designed with IP68 protection and F-class insulation allows rising temperature. Under normal conditions of temperature rise, the motor has long insulation life, and good diving cooling effect. If the actual rising temperature is low, the motor insulation life would be longer.

    4. Motor cooling

    The motor dissipates heat through the casing. As long as the medium submerged half of the motor stator casing, it can operate reliably and safely. The more the motor is submerged, the better for motor's cooling

    5.Shaft seal

    The motor shaft seal adopts two independent mechanical seals in series to form two reliable sealing lines. The first is in the medium, and the sealing surface is pressed tighter as the medium pressure increases, preventing water from entering the oil chamber. And the second is in the oil chamber, preventing oil from entering the motor. Even if the first failed, the second one can still prevent oil and water from entering the motor. The bellows-type mechanical seal and the innovative structural cavity improve the reliability of the shaft seal. Under normal application, the trouble-free operating time exceeds 8000 hours.

    6. Oil room

    The oil chamber is the first barrier that prevents the medium from entering the motor from the shaft and prevents the medium from penetrating into the electrode. If the first mechanical seal leaks, the buffer medium in oil chamber cannot enter the motor directly. At the same time, lubricating and cooling the friction surfaces of two independent machine seals to make the machine seal work more reliably, besides it can also take away part of heat from the bearing and the motor.

    7.Bearing

    The double-row angular contact bearing at the bottom has a strong bearing capacity, which is combined with the upper deep groove bearing to form a reliable support for the motor pump shaft. It can form large bearing margin for the radial, axial and other forces generated during the operation of the sewage pump, which can ensure the stable operation and long service life.

    8.Cable and seal

    1) The cable is a heavy-duty rubber-sheathed flexible cable that is resistant to sewage. The cross-section of the cable core is designed for long-term reliable operation at 40 ° C ambient temperature and full load power of the motor. If the sewage pump works, the motor will operate under non-full load power or under 40C°, the service life will be longer.

    2) The cable rubber sleeve and the motor gland are sealed and compressed to prevent the medium from infiltrating into the motor cavity between the cable and the motor cover.

    3) There is rubber vulcanization between the cable sleeve and the core. Once the rubber jacket scratched, it can still prevent the medium from entering the motor from the cable sleeve.

    9. Motor housing

    The housing, the upper-end cover and the gland etc. constitute the motor cover, and the parts are connected and matched with reliable static seal. The pressure test will be applied to make sure there is no leakage.

    10.Safety protection inside the pump (acting through the dedicated electric control cabinet)

    1). Oil and water probe:

    Installed in the oil chamber to detect the leakage of the first mechanical seal (in the medium). When the leakage medium reaches the oil chamber, it will report with an alarm signal.

    2). Float switch

    Installed in the motor cavity to detect the leakage of the second mechanical seal. When the oil (oil-water mixture) enters the motor, the float switch will report with an alarm signal and stop the pump.

    3). Thermosensitive components

    Installed in the motor stator winding. If the motor is overloaded or the motor winding temperature (or other reasons cause motor winding heating) reaches a certain value, it will report with an alarm signal and the pump will be stopped.

    11.External control system

    The special electric control cabinet can process all kinds of signals in the pump to realize the functions of control, protection, sound-light alarm and a variety of automatic control of single pump and multiple pumps.

    When the user uses their own electric control cabinet, shall contact our electric control cabinet professional group to guide the user to install the protection controller in the electric control cabinet.

    12.Optional

    Forced cooling system. The motor housing is equipped with metal sleev

ZJQ Submersible Slag Pump

ZJQ series pump is developed and improved from ZJL (vertical slurry pump) and overcome its deficiency.

WhatsApp:

Contact Us for Shipping, delivery, and payments information.

Share to

Products Category

Tag list

Send Inquiry

*Note: Please fill in the information accurately and keep the communication open. We will contact you as soon as possible.

Submit

Product Accessories

Content update in progress,...

Request Quote

We will contact you within one working day. Please pay attention to your email.

SUBMIT